Are there any issues that need to be paid attention to during the operation of the solvent recovery machine?
1. Before the first use, check whether the power supply is connected correctly, and make sure that the bolts of the control box are tightened; turn on the power switch to check that the cooling fan is running normally.
2. The level of the waste liquid should be lower than the highest level line, and the contact surface between the gasket and the flange should be cleaned up to prevent the solvent vapor from leaking.
3. Turn on the switch and press the start button. The device will start to run. Make sure that there are large enough barrels for clean liquid to avoid overflow.
4. It is strictly forbidden to pour waste solvents containing peroxides and a large amount of digested cotton into the barrel for recycling together to avoid gas explosion.
5. It is strictly forbidden to store a large amount of waste solvents near the recycling machine, and the linking equipment and the part of the barrel must be connected to the electrostatic clamp.
6. It is strictly forbidden to start fire, smoke and other open flames near the recovery machine, and the power switch, etc., all adopt the explosion-proof level.
7. During the operation, it is strictly forbidden to open the lid directly without cooling, and touch the hot part of the tank to avoid danger.
8. If you find any fault, please turn off the power and notify the maintenance personnel to deal with it. You must wait for the equipment to cool down before dealing with it.
9. When recovering some unknown liquids, please consult the corresponding professionals to avoid potential safety hazards.
10. After the recovery is completed, clean up the recovered solvents and residues, and turn off the power supply.
11. Please pay attention to the operation of the recovery machine. Personnel error is the biggest safety hazard of the recovery machine. It is recommended to use a solvent recovery equipment with multiple safety protections. After all, the price is one product. Please operate the recovery machine carefully
12. During operation and maintenance, workers must wear work gloves, protective glasses, and protective masks.
