Nowadays, more and more companies use solvent recovery equipment. This machine is just like the car in our lives. It needs to be maintained for a certain period of time to increase the service life of the machine.
1. First is the appearance. A clean and tidy appearance offers a good image of the company. And it can also give the staff a good mood for the day.
2. The maintenance of solvent recovery equipment is only related to the consumables. We firstly consider to change the heat transfer oil. The equipment is heated indirectly by heat transfer oil which needs to be replaced every 1000 hours. Otherwise, the over heated oil will cause serious carbon deposition, which has a great influence on the heating efficiency. Although the machine seems working normally.
However, potential dangers may be occurred at this time. Carbon deposits will slowly be attached to the heater. The heating efficiency will gradually become lower and lower time by time, which means the same volume waste solvents need longer time to recover. More and more electric energy is consumed.
Carbon deposits adhering to the heater can also make the heater difficult to clean. It will only increase the burden on the machine and increase the difficulty of maintenance and repair work.
3. Recycling tank. The cleaning of the recycle bin depends on the status of the residue in the waste liquid you recycle. There are many residues, so we’d better clean up once a day.
If it is difficult to manage the residue, it is recommended that we adjust the recycling time so that the residue is not so dry to facilitate subsequent cleaning.
4. Condenser. Under normal circumstances, there will be no problems with condenser. If there is any failure, it is recommended to contact our company in time, and there will be professional engineers to solve the problem for you.
