alisa@calstar.cn    +0755-84621084
Cont

Have any Questions?

+0755-84621084

Jul 20, 2021

Several Problems Of Solvent Recovery Machine Prone To Accidents

The solvent recovery machine market is chaotic. Different configuration products have different prices. Because customers cannot see the recovery machine entity. With the development of the Internet, every company is comparing prices. In fact, customers ignore one problem and manufacturers cannot What does low price mean when doing business at a loss? Low cost will give you a lower price, and the safety issues of solvent recovery machines are often ignored.

The safety problems of the solvent recovery machine are as follows:

1: After the safety valve is used for a period of time, the pressure cannot be relieved, resulting in excessive pressure in the tank, and the lid is flying out due to the pressure, and there is a lack of a large safety valve exhaust port

2: The equipment has no pressure control system. Once pressure is generated, the safety valve will release the pressure again, and the heater is still heating. When the pressure is too high, it will cause safety problems

3: There is only one temperature control. When the thermostat is damaged or the thermocouple is damaged, it will keep heating, causing smoke or fire in the solvent barrel

4: There is no Teflon coating in the tank, which causes the residue to evaporate, and the residue adheres to the four walls, causing the pot to not be heated up, and even the residue is steamed and smoked

5: Lack of fan or circulating water damage protection device. Once the fan is damaged or circulating water is lacking, it will cause outflow of gas, causing safety hazards caused by excessive concentration.

6: There is a lack of a window observation port. Once it is evaporated to dryness, it can be shut down through the observation port to prevent smoke and fire caused by excessive nitrocellulose

7: The equipment barrels are made thinner and thinner, and the fittings become worse and worse. Because customers or sellers pay more and more attention to the price, the material cost rises, the labor cost rises, and the factory rent rises. Manufacturers have two choices, or low price Don't do it, or reduce the cost of materials to maintain it. Do you think the price of the recycling machine you buy is low, and you think the purchase will be bargaining. As everyone knows, the seller of the solvent recycling machine has to eat, and will he do things that are not profitable? In the end, the customer can only use one or two years before it breaks or the barrel is flattened, or there is an accident!

IMG_8249

Send Inquiry