1. The solvent recovery machine often handles different solvents. If the machine is not cleaned frequently, thick residue will be stained in the barrel of the solvent recovery machine. If the residue in the recovery barrel is not cleaned thoroughly, the residue will accumulate and become thicker. In the state of high temperature heating, the residue will be hardened and carbonized, the automatic shutdown time will be prolonged, and the solvent recovery machine will cause the residue to overheat and smoke.
2. The solvent recovery machine will smoke even if the temperature controller is set incorrectly. For example, if the boiling point of a certain solvent is 65°C, if the setting of the shutdown temperature controller is higher or too close to 65°C, the machine will not automatically shut down. Continuous heating will cause the residue to overheat and smoke. In addition, the heat medium oil heating temperature setting of the acetone recovery machine Too high will also cause the residue to overheat and smoke.
3. The contact part between the lid sealing gasket and the recovery barrel is not cleaned up, causing the steam to go out. If there is a heat source around the steam, it will also cause the solvent recovery machine to smoke.
