Introduction to Acetone Solvent Recovery Equipment
I. Core Working Principle: Distillation Separation
The core technical principle of the acetone solvent recovery equipment is distillation. It takes advantage of the difference in boiling points between acetone and impurities such as water, resin, pigment, ink, etc., to achieve separation and purification through heating and condensation.
The boiling point of acetone is low: approximately 56℃.
High boiling point of water: 100℃
The boiling points of other impurities: Usually much higher than that of acetone.
By precisely controlling the temperature, acetone with a lower boiling point can be vaporized first. Then, the acetone vapor is condensed back into liquid form, thereby obtaining pure recycled acetone. Meanwhile, water and impurities with higher boiling points remain in the residual liquid and are treated as hazardous waste in a professional manner.
II. Main Equipment Types
According to different operation methods and structures, the common acetone recovery equipment mainly includes the following types:
Intermittent recovery device (batch type)
Working mode: Add the waste acetone to be recovered into the recovery kettle at one time. After completing the entire process of heating, evaporation, condensation and collection, discharge the residue and then proceed to the next batch of processing.
Features:
Advantages: The equipment structure is relatively simple, the investment cost is low, the operation is flexible, and it is suitable for small-batch and multi-variety recycling tasks.
Disadvantages: Low production efficiency, relatively high energy consumption, and manual operation is required for loading and unloading materials.
Applicable scenarios: laboratories, small and medium-sized factories, and situations where the amount of waste solvents generated is unstable.
2. Continuous Recovery Device
Operating Mode: Waste acetone continuously enters the system, while recovered acetone and residue are continuously discharged. The entire process is automated.
Features:
Advantages: Large processing capacity, high production efficiency, low energy consumption, high degree of automation, and suitable for large-scale and continuous production.
Disadvantages: The equipment is complex, the investment cost is high, and it has a high requirement for the stability of the feed material.
Applicable scenarios: Large-scale enterprises in the chemical, pharmaceutical, coating, and other industries that generate a large amount of waste acetone.
3. Vacuum recovery device
Working mode: Create a vacuum (negative pressure) environment within the system to lower the boiling point of acetone.
Features:
Advantages:
Energy saving: The boiling point is reduced, requiring less energy for heating.
Safety: Low-temperature operation reduces the risk of fire and explosion caused by high temperatures.
Protect materials: Prevent certain heat-sensitive impurities from decomposing or polymerizing at high temperatures, which could affect the quality of recovered acetone.
Disadvantages: The equipment requires good sealing, and the cost and maintenance requirements are higher.
Applicable scenarios: Situations with extremely high safety requirements or where the waste solvent contains heat-sensitive substances.








